ATL 84° / clear
DESK REVIEW

Testing Two-Bay Network Storage for Small Studios

A benchmark comparison of Synology and QNAP shows where setup ease clashes with raw network throughput.

By Hiroshi Tanaka
ATLANTA · November 14, 2026 · 4:00 AM ET
5 min read
Testing Two-Bay Network Storage for Small Studios

Subscription cloud storage fees climb steadily once an archive pushes past two terabytes, driving photographers, software developers, and small practices back toward local hardware. Network-attached storage offers total ownership of files, but purchasing decisions at the two-bay desktop tier remain polarized. Buyers face a stark choice between the polished, low-maintenance software ecosystem of Synology and the superior hardware specifications offered at comparable pricing by QNAP.

For four weeks, the Pulse Chronicles review desk tested two standard two-bay enclosures: the Synology DiskStation DS224+ and the QNAP TS-264. Both systems were configured with identical 8TB Seagate IronWolf 5,400 RPM hard drives running in a mirrored RAID 1 array. Testing evaluated sustained sequential read and write speeds across a multigigabit local switch, random small-file transfers involving 42,000 mixed raw image assets, active power consumption at the wall, and the administrative burden required to keep each machine secure.

Hardware Specifications and Port Bottlenecks

On paper, the component disparity between the two units is substantial. The Synology DS224+ ships with an Intel Celeron J4125 quad-core processor and two 1-Gigabit Ethernet ports. It provides one accessible SO-DIMM slot to expand its baseline 2GB of DDR4 memory. It offers no native M.2 NVMe slots for solid-state caching, meaning any performance acceleration must occur within the two primary 3.5-inch drive bays.

QNAP equips the TS-264 with an Intel Celeron N5095 quad-core processor, two 2.5-Gigabit Ethernet ports, and two internal M.2 2280 PCIe slots dedicated to NVMe caching or high-speed storage pools. In sequential transfer benchmarks using a single workstation equipped with a 10GbE network card, the QNAP moved a 45GB compressed video project file at an average rate of 278 megabytes per second over its 2.5GbE link. The Synology, restricted by its physical gigabit network controllers, plateaued at 114 megabytes per second. Over five hundred gigabytes of transfers, that difference converts to hours of waiting.

"Btrfs provides data integrity features that protect shared folders from silent data corruption through metadata mirroring and self-healing algorithms."

Software Ecosystems and Administrative Overhead

Where QNAP wins the physical throughput argument, Synology recaptures ground through DiskStation Manager. DSM 7.2 remains the benchmark for operating systems in consumer and prosumer storage. Initial setup of the DS224+ required 14 minutes from bare drives to a mapped network share. The Btrfs file system operates as the default configuration on the Synology unit, delivering point-in-time snapshots that defend against accidental deletions and ransomware modifications without consuming disproportionate disk capacity.

QNAP runs QTS 5.1, an interface that feels significantly more fragmented. Storage configuration requires navigating distinct layers of storage pools, thick volumes, and thin volumes. While this architecture gives advanced system administrators granular control over storage provisioning, it exposes novice operators to operational pitfalls. The QTS notification pane generated frequent security reminders and application upgrade prompts that demanded manual approval, whereas the Synology silently executed scheduled health routines and security patches.

Thermals, Noise, and Everyday Operation

Small-office desktop enclosures frequently sit within earshot of a workstation, making chassis acoustic isolation relevant. In idle states, the Synology DS224+ registered 21 decibels at a distance of one meter, drawing 13.8 watts from the wall with drive platters spinning. Under an intensive random-access write test, sound levels rose to 28 decibels, with drive chatter muffled effectively by the plastic internal drive sleds.

The QNAP TS-264 drew 18.2 watts at idle and 27.4 watts during heavy sequential writes. Its rear cooling fan exhibited a higher-pitched acoustic profile under load, registering 33 decibels at one meter. Users who plan to situate their NAS on an active desk surface will notice the QNAP during sustained read-write operations, while the Synology blends easily into standard ambient office noise.

The Verdict

If daily workflow revolves around direct editing of raw video footage or shifting multi-gigabyte virtual disk images across an existing 2.5GbE network, the QNAP TS-264 is the objectively superior technical tool. Its dual 2.5GbE interfaces and dual M.2 slots prevent the immediate performance dead-end present in Synology's entry-level business hardware.

For everyone else—including remote workers needing automated workstation backups, reliable remote access without network gymnastics, and hands-off file syncing—the Synology DS224+ remains the prudent recommendation. What Synology concedes in raw bandwidth, it recoups in operational stability and software refinement that does not require an ongoing administrative time tax.

hardwarestoragereviewscomputing